Blackpool Air Testing – Fast, Reliable Service
Domestic & Commercial Air Testing in Blackpool, Lancashire
Do I need an airtightness test?
It is a government requirement for any new build development to undergo an air test. Air testing or air leakage testing is a general term which is used for the amount of air loss from a property.
In contrast to general airflow. These include draughts and voids within the building fabric.
Without an airtightness test being carried out, this could lead to the owner of the new build property to experience a loss of heat.
This is why it is important to find out in the early stages as to whether there is any air leakage.
Get a FAST FREE Quotation
How is an air leakage test carried out?
The air testing procedure is carried out in Blackpool by placing a large industrial fan, or several fans (depending on the size of the dwelling) on the opening to the property. In most cases, this would be the front door.
All the internal doors of the property will remain open to enable the whole property to be pressurised.
The fans speed will alternate which will change the air pressure of the building. These results will be recorded.
The estimation results consist of the readings from the wall surfaces, floor and roof covering.
The whole process takes about 60 minutes for each individual new build property tested. A full report of the air test is provided once complete.
What air permeability rating is required?
An air test pass is 5m3/hr/m2 or below for an air permeability rating which is similar to the amount of uncontrolled air that is being lost or leaking from the dwelling.
In the unlikely instance where the test fails, we will guide you to identify where the leakages are located so we can re-test in order to give you a pass.
Our air testing service
Ratio Seven can work with you right from the beginning of the development, typically the design phase.
However, we understand that it is not always possible so we aim to be extremely versatile.
Where we have been involved from the beginning, the majority of our Blackpool and Lancashire customers have accomplished a first-time pass rate.
In the most part, the results are provided on the same day.
- Competitive Pricing
- Same Day Pass Rate
- Immediate Results Provided
- Discounted Rates For Additional Air Tests
- Next Day Air Testing Available Upon Request
- Free Pre-test Consultation
- Temporary Ventilation Sealing Provided
- Flexible Appointments To Suit You
- Weekend Appointments Available
- Accreditation New Build Specialists
Looking for a same day air test in Blackpool, Lancashire
Do you need an air test on the same day in Blackpool? Sometimes, it is possible to arrange this with less than 24 hours notice.
Have you been let down by another company and are now in urgent need of an air test certificate?
Not a problem, just get in touch and we will have a reliable air tester on site without delay.
If we have a Blackpool air testing engineer available in your area we will certainly do our very best to do this for you. Please contact us directly for this service.
Air Testing Areas Covered in Lancashire
Air Testing In Blackpool
Avoiding last-minute delays with proper compliance planning
Last-minute delays can throw a serious spanner in the works during construction, often caused by poor building compliance planning. From energy assessments to air testing, this article looks at why getting compliance right from the start is key to keeping your build on track. Keep reading to find out how.
How to prepare your site for an airtightness test
Planning an airtightness test soon? Before you jump in, it's worth knowing how much hinges on getting your prep right. This guide walks you through how to prepare your site naturally, spot potential problems early, and avoid test-day setbacks. Let’s get your build ready the smart way.
Failing an airtightness test and how to fix common issues
Failing an airtightness test naturally raises a few red flags, but it’s more common than you might think. Whether it’s draughty windows or missed gaps in construction, this guide takes a closer look at what causes those failures and how you can fix them before it’s too late.
