Air Testing in Long Eaton
Domestic & Commercial Air Testing in Long Eaton, Derbyshire
Do I need an airtightness test?
It is a government requirement for any new build development to undergo an air test. Air testing or air leakage testing is a general term which is used for the amount of air loss from a property.
In contrast to general airflow. These include draughts and voids within the building fabric.
Without an airtightness test being carried out, this could lead to the owner of the new build property to experience a loss of heat.
This is why it is important to find out in the early stages as to whether there is any air leakage.
Get a FAST FREE Quotation
How is an air leakage test carried out in Long Eaton?
The air testing procedure is carried out in Long Eaton by placing a large industrial fan, or several fans (depending on the size of the dwelling) on the opening to the property. In most cases, this would be the front door.
All the internal doors of the property will remain open to enable the whole property to be pressurised.
The fans speed will alternate which will change the air pressure of the building. These results will be recorded.
The estimation results consist of the readings from the wall surfaces, floor and roof covering.
The whole process takes about 60 minutes for each individual new build property tested. A full report of the air test is provided once complete.
What air permeability rating is required?
An air test pass is 5m3/hr/m2 or below for an air permeability rating which is similar to the amount of uncontrolled air that is being lost or leaking from the dwelling.
In the unlikely instance where the test fails, we will guide you to identify where the leakages are located so we can re-test in order to give you a pass.
Our air testing service in Derbyshire
Ratio Seven can work with you right from the beginning of the development, typically the design phase.
However, we understand that it is not always possible so we aim to be extremely versatile.
Where we have been involved from the beginning, the majority of our Long Eaton and Derbyshire customers have accomplished a first-time pass rate.
In the most part, the results are provided on the same day.
- Competitive Pricing
- Same Day Pass Rate
- Immediate Results Provided
- Discounted Rates For Additional Air Tests
- Next Day Air Testing Available Upon Request
- Free Pre-test Consultation
- Temporary Ventilation Sealing Provided
- Flexible Appointments To Suit You
- Weekend Appointments Available
- Accreditation New Build Specialists
Looking for a same day air test in Long Eaton, Derbyshire
Do you need an air test on the same day in Long Eaton? Sometimes, it is possible to arrange this with less than 24 hours notice.
Have you been let down by another company and are now in urgent need of an air test certificate?
Not a problem, just get in touch and we will have a reliable air tester on site without delay.
If we have a Long Eaton air testing engineer available in your area we will certainly do our very best to do this for you. Please contact us directly for this service.
Air Testing Areas Covered in Derbyshire
Derby | Chesterfield | Long Eaton | Ilkeston | Swadlincote | Belper | Dronfield | Buxton | Ripley | Staveley | Glossop | Heanor | Bolsover | Eckington
Air Testing In Long Eaton
A little bit about Derbyshire
The county of Derbyshire is located in the East Midlands of England. Located at the southern edge of the Pennine mountain range, it includes much of the Peak District National Park.
As a National Forest it is bounded by Greater Manchester to the north-west, West Yorkshire to the north, South Yorkshire to the north-east, Nottinghamshire to the east, Leicestershire to the south-east, Staffordshire to the west, and Cheshire to the west.
Derbyshire’s highest point is Kinder Scout, at 636 metres. Derbyshire’s lowest point is Trent Meadows, at 27 metres. With a length of 66 miles, the River Derwent runs north to south.
Among the furthest points from the sea in Britain is Church Flatts Farm at Coton in the Elms near Swadlincote, according to Ordnance Survey data from 2003. Despite its unitary status, Derby remains part of the ceremonial county. It has 30 towns in the non-metropolitan county with tens of thousands to a hundred thousand residents, but sprawling rural uplands with sparse habitation.
SAP Assessment Guide for Self-Build Project Compliance
Planning a self-build? A SAP assessment is a must if you want to stay on the right side of building regs. From design stage to final build, this guide covers the key checks, expert input and timing you need to stay compliant. Let’s break it down step by step.
SAP consultancy for energy rules in new builds
Navigating energy rules in construction can be tricky, but expert SAP consultancy helps keep your project on track from planning to sign-off. Covering everything from energy reports to thermal analysis, this guide shows how good advice early on can save time, money and stress. Keep reading to find out more.
Energy Efficiency Consultants Supporting Smarter Builds
Energy efficiency consultants can be a real asset when navigating building rules, cutting costs, and improving home performance. Whether you’re a house builder or developer, this guide walks you through smart ways to meet energy standards and avoid common setbacks. Here’s what to look out for next.