Looking for air testing Newcastle upon Tyne? – Whether you’re building a new home or commercial building, you’re probably wondering how to find an air testing service near you. You may also be interested in air permeability testing, which is a good way to ensure that your building’s airtightness is up to standards.
Looking for an Air Permeability test near me?
Having a knowledge of how much air leaks into your building is crucial for reducing energy consumption and improving the comfort of your occupants. As well as being costly to run, uncontrolled airflow can cause environmental damage. The Air Tightness Testing and Measurement Association (ATMA) is an organisation dedicated to the development of standards and procedures for air tightness testing.
Air permeability testing is not only important in reducing energy consumption, it can also be used as part of a wider energy audit. By reducing the amount of air leakage, a building can achieve an improved energy rating and environmental certification.
Air permeability testing is required on all residential developments. However, buildings that have useful floor area less than 500m2 may be exempt. Typically, a building’s air permeability is assessed as a measure of the seal quality of the building envelope.
Is airtightness testing important in Newcastle upon Tyne?
Performing airtightness testing on a building is a great way to assess its performance and ensure it meets all relevant building regulations. It can also provide a quantitative quality control measure, which can help to reduce your energy bill and improve the indoor environment.
Airtightness testing has been used for high-performance housing since the 1980s. It can help to measure the total air lost through leaks in a building, which is useful for identifying problem areas and determining the amount of insulation needed.
Airtightness testing is also helpful in the retrofit phase of a project. It can help to determine the amount of insulation needed, as well as the amount of airtightness effort required.
It can also help to reduce your CO2 emissions. It has been estimated that around 30% of a building’s heat is lost through air leaks. This is an area that can be a major performance concern. Performing airtightness testing early on will help identify and fix problems, which can lead to energy savings.
How is airtightness testing carried out – Air testing near me
During the construction of a new building, it is very important to carry out airtightness testing. This can help reduce the running costs of your property. In addition, it can also make your building environmentally friendly.
Air leakage can cause significant heat loss. These leakages can be caused by gaps and cracks in the structural fabric of your building. These are difficult to see through a visual inspection. Luckily, an airtightness specialist can identify these areas. They may be able to fix them during the test.
Airtightness testing can be carried out by a NSAI registered tester. There are many factors that affect the duration of an airtightness test. The test can take from two to five hours. It depends on the size of your dwelling and the location.
Air testing for new builds in near me in Tyneside
Having an air test for new builds near me in the Newcastle upon Tyne area will help you understand the energy efficiency of your building. It will also help you understand the ventilation requirements for your building. You can also save money on your energy bills by having a good airtightness test.
The Air Permeability Index is expressed as a number, m3h-1m-2, in relation to the pressure differential between the air inside the building and the air outside. It is measured with a blower door testing equipment that uses a fan to pressurise the building and record the pressure differential. The results of the test are recorded instantly.
The minimum requirement for new dwellings is that the Air Permeability Index is at least 5 m3h-1m-2. If your building does not have a design air permeability of at least 5 m3h-1m-2 then you must carry out remedial works.
Commercial air testing near me – Tyne & Wear
Having a professional perform a commercial air quality survey is a great idea for a lot of reasons. It will show you which areas need work and help you protect your employees from the health hazards of the office. For example, the smell of laundry detergent can be very off-putting to many people.
While commercial air quality testing is not a new idea, there are still many businesses that still do not perform the requisite testing. Having an air quality survey performed by a professional will ensure you are making the correct and oh-so-important decisions about your facility.
The best part about having a professional perform a commercial air quality assessment is that you will be provided with a detailed report and a checklist of recommended actions.
Newcastle upon Tyne postal code areas covered:
NE1, NE2, NE3, NE4, NE5, NE6, NE7, NE8, NE9, NE10, NE11, NE12, NE13, NE15, NE16, NE17, NE18, NE19, NE20, NE21, NE22, NE23, NE24, NE25, NE26, NE27, NE28, NE29, NE30, NE31, NE32, NE33, NE34, NE35, NE36, NE37, NE38, NE39, NE40, NE41, NE42, NE43, NE44, NE45, NE46, NE47, NE48, NE49, NE61, NE62, NE63, NE64, NE65, NE66, NE67, NE68, NE69, NE70, NE71, NE82, NE83, NE85, NE88, NE92, NE98, NE99
